Blaupunkt RCM 169 operating instructions Read, Scan Scantime, Tom

KC (KeyCard)

Use this menu to make adjustments to the KeyCard settings.

DSC programming

DLAY (Delay)

If an amplifier has been connected to the system, this setting can prevent the annoy- ing power-on pop noise. Use the delay func- tion to switch on the amplifier with a slight delay.

“Delay 1” = 250 ms to “Delay 9” = 2.25 sec. delayed power-on.

VOL (Volume)
Select the power-on volume.
Use	/ to adjust the desired volume lev-	READ
el. If you use << to select “Last VOL”, the
		To read out the KeyCard data.
system will come on at the volume selected		The card supplied with the radio is used to
before it was switched off.
		display the model name, type number (7 6..)
SCAN (SCANTIME)		and the serial number.
		With the extra card it is possible to display
Set the scan time for the Scan and Preset
		data entered by your specialised dealer.
Scan functions from 5 to 30 seconds. This
		(See the section on “Short Additional Mem-
setting is valid for radio, cassette or CD scan.
		ory S.A.M.”).
HP-F (High pass function)		If you remove the KeyCard during the read-
		ing process, “Insert” will appear on the dis-
The proportion of low frequencies can be
		play panel.
reduced. It is advisable to take advantage
of this function when you have connected a		LRN (Learn)
subwoofer.
		To “train” a second KeyCard.
Use	/ to select filters 1-5.
		Please read the information in the section

Use << to switch the high pass function off.

on “KeyCard theft protection system” - “Training a second KeyCard”.

LED (Light Emitting Diode)	DEUTSCH
When the audio system is switched off and
the KeyCard has been removed, you can
	ENGLISH
The flashing light is not visible unless the
have the ON knob and an LED in the cas-
sette slot flash as additional theft protection.
operating panel is open.
LED off << >> LED on.	FRANÇAIS
Refer to the information in the section on

“KeyCard theft protection system” - “Flash- ing light as theft protection”.

TOM	ITALIANO
If you have a second KeyCard with a Turn-
On Message, you can switch off this infor-
mation with “TOM off”. The default setting
	NEDERLANDS
is “TOM on”.
TOM off << >> TOM on.
For more information refer to “ KeyCard theft
protection system” - “Turn on Message
(T.O.M.)”.	SVENSKA
	ESPAÑOL
	PORTUGUÊS

91