Radio operation with RDS (Radio Data System)
Seek tuning
Up
Down
<</ >> Down/Up in short intervals (for FM only, when “AF” is switched off)
Manual tuning with << / >>
You can also tune into a station manually.
Important:
AF and PTY must be switched off (i.e. the symbols do not light up in the display).
If necessary, deactivate these functions in menu level 2.
Manual tuning:
•Press << >>; the frequency will change in short intervals downwards or up- wards.
If you hold << or >> on the rocker switch pressed down, the frequency scan will ac- celerate.
Scrolling through the broadcast- ing networks (FM only)
You can use the << >> buttons to tune into stations in your reception area.
Important:
a)You must have tuned into the station at least once before. To do this, you can press TS to start Travelstore in menu level 2.
If necessary, refer to the section on “Automatically storing the strongest stations with Travelstore”.
b)AF is switched on and PTY is switched off. In this case, “PTY” will not light up under the top line of the display.
If necessary, switch these functions on or off in menu level 2.
Scrolling
If it is possible to receive several different sta- tions in the station network, you can use >> (forward) or << (back) to scroll through the broadcasting network, e.g. NDR 1, 2, 3, 4 ...
Changing the memory bank (FM)
You can shift between the memory banks FM1, 2, 3 and T in order to store stations and recall them later.
•Press NEXT as often as necessary un- til the desired memory bank lights up in the DOT display.
Storing stations
On each of the FM memory banks (FM1, 2, 3 and T), you can store six stations on the preset buttons 1 - 6.
On MW/LW, you can also store six stations each.
•Press TU, menu level 2 will appear in the display.
•Select FM or MW/LW with AM.
For AM, press NEXT to select MW or LW.
•Use the rocker switch to tune into a station (either automatically 
/ 
or manually << >>).
72
