Blaupunkt RCM 169 operating instructions KeyCard theft protection system

KeyCard theft protection system

“Training” a second KeyCard /	Incorrect KeyCard	Turn On Message (T.O.M.)
Replacing a KeyCard	If a wrong KeyCard is inserted, then “Wrong The second KeyCard available from your
When the unit is in operation with the first	KC” will appear in the display.	specialised dealer also allows you to dis-
KeyCard, you can “train” a second one to	Remove the wrong card and insert the cor-	play a special turn-on message each time
use with the set as well.	rect KeyCard.	the radio is switched on.
If you want to “train” a second KeyCard:		The freely selectable text with a maximum
	Displaying the radio pass data	of 48 characters can be programmed by any
• Insert the first KeyCard and turn on the
		dealer who has the required equipment
set.	You can use the KeyCard supplied with your
		available.
• Press DSC, KC (KeyCard) and LRN	set to display the radio pass data such as	Each time you turn on your system with the
(learn) one after the other.	the model name, product number (7 6..) and	second KeyCard, the programmed text will
• Remove the first KeyCard and insert	serial number.	appear in the display. Important: “TOM on”
the new one.	Please refer to the section on “DSC pro- must be selected in the DSC menu.
The display will read “Learn OK”.	gramming - KC (KeyCard), READ”.	To find out how to do this, refer to the sec-
		tion on “DSC programming - KC (KeyCard),
To exit the menu	Short Additional Memory
		TOM”.
• press DSC.
	(S.A.M.)
Now you can also use the new KeyCard for	The second KeyCard available from your	Flashing light as theft protection
operating your unit.
	specialised dealer allows you to read out
A maximum of two cards can be used with		Flashing light diode A
	short information under the DSC menu item
the set.
	“KC, READ”. This information will run When the vehicle is stationary and the Key-
If you attempt to “train” a third one, the ac- through the display and could include, for		Card has been removed, the light diode can
cess authorisation for the KeyCard not used	example, the phone number of your car re-	be switched to flash as an extra anti-theft
for the “training” process will be deleted au- pair service or the emergency call number		device.
tomatically.	of your automobile association.	For this to function properly, it is necessary
	The freely selectable text with a maximum	that the positive power supply line and the

of 162 characters can be programmed by	permanent +12 V lead are connected as
	described in the installation instructions.
any dealer who has the required equipment
available.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

65