completed, the system will switch off after a couple of minutes. If the DCF-77 signal is not available, the system will switch off af- ter a few seconds.
AutoSync
The clock is synchronised with the RDS-CT signal or the DCF-77 signal. The system will not attempt to receive the DCF-77 signal unless the time cannot be synchronised with the RDS-CT signal.
Sync off
The internal clock will not be synchronised.
MODE
Select the clock display.
(12h mode << />> 24h mode).
If you select the 12h mode, a.m. will appear to indicate the morning hours and p.m. for the afternoon/evening.
VIEW (Displaying the time)
There are a number of different display modes, depending on how the audio sys- tem has been connected.
a) the audio system can be switched off with the ignition.

DSC programming

CLK (Clock)

Use this menu to adjust the clock settings.

SET

The time is set automatically when the au- dio system is tuned into an RDS station with the “CT” (clocktime) function.

If this signal is not available, it is possible to adjust the clock with “SET”.

The time will flash in the top line of the dis- play in 12 (a.m./p.m.) or 24-hour mode. Use << />> to select the value you want to adjust (hours/minutes), use / to adjust the value.

SYNC

The time is synchronised automatically with the RDS-CT signal.

This synchronisation function can be switched off when you want to display a dif- ferent time or when the RDS-CT and DCF- 77 time signals (atomic clock) are not strong enough.

Use the rocker switch / to select the type of synchronisation:

- RDS Sync - DCF Sync - AutoSync - Sync off

Use << on the rocker switch to switch syn- chronisation off (“Sync off”). Use>> to re- turn to the previous mode.

RDS Sync

The clock is synchronised with the RDS-CT signal only.

DCF Sync

The clock is synchronised with the DCF-77 signal only. When you switch off the audio system (by pressing ON for approx. 1 sec.), the system will not switch off immediately in

order to synchronise the time first. While this

process is taking place, you will hear “Big The system is switched off with “ON” when

Ben”. After the synchronisation has been

the ignition is switched on.

 

92

Page 44
Image 44
Blaupunkt RCM 169 operating instructions CLK Clock, Set, Sync