Blaupunkt RCM 169 operating instructions DSC programming, VAR Various

HCUT

Interference-related cut in the treble sound. Cuts the treble when interference occurs. Can be adjusted from NO HICUT (off) to HICUT 3 (highest setting). Switch off Hicut with <<, adjust the values with / . Which setting is the most pleasant is a matter of personal preference.

DISP (Display)

Use this menu to make the display settings.

DSC programming

PTY

Use to select the language used to indicate the program type: Deutsch, English or Français.

SHARX

Switches the bandwidth in the FM frequen- cy range.

When there are a large number of stations within your current reception range, use <<

>>to switch to Sharx on which will prevent

most interference from adjacent radio sta-

tions.

This function has been set to “Sharx on” at ANGL (angle)

the factory.	Use	/	to adjust the display to your indi-
	vidual viewing angle.
S-DX	DIM
To adjust the seek tuning sensitivity.
	Use	/	to adjust the display brightness
“dx” stands for distant reception.
	for day and << >> for night.
Select “dx3” if you want to receive strong
stations which are further away, select “dx1”	FADE
if you also want to tune into weaker stations
	Switches display off automatically.
which are further away.
	Fader 1		- 15 sec. after the last adjustment
S-LO			is made the display will switch
To adjust the seek tuning sensitivity.			off completely.
“lo” stands for local reception.	Fader 2		- The top line remains illuminated,
Select “lo3” if you want to receive strong sta-			everything else switches off af-
tions in the local area, select “lo1” if you want		/	ter 15 sec.
to tune into weaker stations in the local area.	Use		to adjust the setting.

Fade off - The display remains on perma- nently when the audio system is switched on.

Use << >> to adjust this setting.

VAR (Various)

Use this menu to make a number of differ- ent settings.

TVOL

Use / to adjust the traffic announcement and warning beep volume from between 0 to 66.

The traffic message will then come through at this volume, if the standard volume is low- er.

If the standard volume is set higher than the TVOL level, then the traffic report will be played at the standard volume.

BEEP

Acknowledgement tone for all functions which require a button to be pressed for more than one second.

Use / to set the volume between 1 and 9. Switch off Beep with << .

90