KeyCard theft protection system
Make sure that the unit is switched off; the | Lost or damaged KeyCard | |
operating panel is unlocked; the KeyCard | If the KeyCard for your unit is lost or dam- | |
has been removed; “LED ON” has been se- | ||
aged you can train a new KeyCard. | ||
lected in the DSC mode (default setting). | You can purchase the new KeyCard from | |
If necessary, please refer to the section on | ||
any authorised dealer. You will also require | ||
“DSC programming - KC (KeyCard) LED”. | ||
| the master code for the unit, which you will | |
Switching off the flashing light | find in the radio pass. | |
The flashing light can be switched off by | Always keep the radio pass in a safe | |
selecting “LED OFF” in the DSC menu. | ||
place. Do not leave it in your vehicle. | ||
| ||
Care of your KeyCard | Training the new KeyCard | |
To ensure that the KeyCard will function | ||
• Insert the new KeyCard into the unit | ||
properly it is important that the contacts are | ||
free from any foreign particles. Avoid direct | and lock the operating panel into posi- | |
skin contact. | tion. | |
If necessary, clean the KeyCard contacts | • Switch the unit off. | |
using a cotton swab dipped in rubbing alco- | • Press TU and Key1 at the same time | |
hol. | and switch the unit on. “0000” will ap- | |
| pear in the display. |
/
- Enter digits
(press as often as required)
<< >> - Select the entry position.
•Press ENT after you have entered the correct master code.
The new KeyCard has been accepted when the unit begins to play.
66
