EN 108 | Installation and Operating Manual VideoJet 8008 / VideoJet 8004 |
|
|
Ethernet link type:
If the unit is connected to the network via a switch, both must have the same default for the type of network connection. If necessary, ask your network administrator what value the switch is set to.
The Auto setting automatically detects the network connection. If necessary, you can specify the value 10 or 100 MBit/s for full or
Caution
Malfunctions such as image faults can occur if the network does not have enough capacity to transmit the maximum data rate generated by the unit.
Dynamic DNS server IP address:
When operating a unit on the Internet, dynamic addresses are used to ensure efficient use of the available IP address pool. That is, the unit is reassigned a (chang- ing) IP address each time a new connection is made. Access is easier if the unit is listed in a DNS server. It registers there at regular intervals and leaves the unit name and its IP address. If you wish to establish an Internet connection to a unit, it is sufficient to enter the appropriate unit name together with the URL of the DNS server. This then reports on the current Internet IP address used to establish the connection.
Dynamic DNS contact interval:
Enter the desired refresh interval in seconds here.
Configuration using a Web browser | Bosch Security Systems |