EN 72

Installation and Operating Manual VideoJet 8008 / VideoJet 8004

 

 

MPEG-4 encoder

For encoding the video signal, you can select a profile for each camera, and for Dual Streaming compatible units you can select two profiles each.

You can identify the Dual Streaming compatible units from the additional MPEG-4 Stream 2 tab.

Selecting a profile

You can configure the MPEG-4 data transmission in accordance with the operating environment (for example network structure, bandwidth, data load). For Dual Streaming compatible units, each encoder can create two data streams at the same time, with different compression settings, such as for transmission and local saving.

Note

The settings must be made individually for each camera input and stream. The numbering is the same as the labeling of the video inputs on the rear panel of the unit.

Pre-programmed profiles are available, each giving priority to different perspectives.

❚Profile 1: Low bandwidth (CIF)

High quality for low bandwidth connections, resolution 352 × 288/240 pixels

❚Profile 2: Low delay (1/2 D1) High quality with low delay, resolution 352 × 576/480 pixels

Configuration using a Web browser

Bosch Security Systems 2006-07 V1.5