EN 98

Installation and Operating Manual VideoJet 8008 / VideoJet 8004

 

 

Auto-connect:

Select the On option to automatically re-establish a connection to one of the previously specified IP addresses after each restart, after a connection breakdown or after a network failure.

Note

Dual Streaming compatible units only: Stream 2 is always transferred for alarm connections. Bear this fact in mind when assigning the profile (see page 72).

Default camera:

Here you can select the camera whose image will be automatically displayed first on the receiver when the alarm connection is made. Depending on the system configuration, the receiver can then select the other cameras as well.

Note

The numbering is the same as the labeling of the video inputs on the rear panel of the unit.

Configuration using a Web browser

Bosch Security Systems 2006-07 V1.5