EN 26 | Installation and Operating Manual VideoJet 8008 / VideoJet 8004 |
|
|
Command inputs
After the connection has been established, you must log onto the unit to access the main menu. Other submenus and functions can be accessed using the
–If necessary, turn off the local echo so that entered values are not repeated on the display.
–Enter one command at a time.
–When you have entered a value (such as an IP address), check the charac- ters you have entered before pressing the [ENTER] key to transfer the values to the unit.
Assigning an IP Address
To use a VideoJet 8008 or VideoJet 8004 in your network, you must assign it an IP address that is valid for your network.
The following default address is preset at the factory: 192.168.0.1
–Start a terminal program such as HyperTerminal.
–First enter ? and then service as the user name. The terminal program dis- plays the main menu.
–Enter command i to open the IP menu.
Installation | Bosch Security Systems |