EN 24 | Installation and Operating Manual VideoJet 8008 / VideoJet 8004 |
|
|
Power on/Power off
Power supply
The VideoJet 8008 and VideoJet 8004 are supplied with a power supply cable and rubber connector. The units do not have a power switch. After you have connected the unit to the power supply and the unit has booted, it is ready for use.
Caution
Where necessary, use suitable equipment to ensure that the power supply is free from interference such as voltage surges, spikes or voltage drops.
Caution
You should only connect the unit to the mains once all other connections have been made.
–Plug the rubber connector of the power supply cable into the Power socket.
–Connect the power supply cable to a fused mains socket. The green Power LED on the front panel of the unit lights up. As soon as the text VideoJet 8008 or VideoJet 8004 is displayed on the screen after the unit has booted, the unit is ready for use.
If the network connection has been correctly set up, the green LED of the 10/100/1000 MBit
Installation | Bosch Security Systems |