VideoJet 8008 / VideoJet 8004 Installation and Operating Manual

EN 17

 

 

 

 

 

Installation

4

 

VideoJet 8008 and VideoJet 8004 are designed as desktop units and intended for installation in a switch cabinet. Mounting in a 19-inch rack using the mounting kit supplied is a quick and easy operation.

For desktop operation, four self-adhesive, non-slip rubber feet are included, which you can stick to the bottom of the unit.

Caution

The unit is designed for indoor operation. Select a suitable location for installation where the unit will not be subjected to conditions of extreme temperature or humidity. The ambient temperature must be between 0 and +40 °C (+32 and +104 °F), and the relative humidity must not exceed 80% (non-condensing).

The unit heats up during operation, so you should ensure that there is adequate ventilation and enough clearance between the unit and heat-sensitive objects or equipment.

Please ensure the following installation conditions:

❚Do not install the unit close to heaters or other heat sources. Avoid locations exposed to direct sunlight.

❚Allow sufficient space for running cables.

❚Ensure that the unit has adequate ventilation. Bear the total heat output in mind, particularly when installing multiple units in a switch cabinet.

❚When making connections, use only the cables supplied or use appropriate cables immune to electromagnetic interference.

❚Position and run all cables so that they are protected from damage, and pro- vide adequate cable strain relief where needed.

❚Avoid impacts, blows and severe vibrations as these can irreparably damage the unit.

Bosch Security Systems 2006-07 V1.5

Installation