VideoJet 8008 / VideoJet 8004 Installation and Operating Manual | EN 99 |
|
|
Motion detector
The unit has an integrated video sensor that can detect changes in the video signal on the basis of image processing. Such changes are due primarily to movements in the camera's field of view.
You can configure the video sensor for any encoder, i.e. for any connected cam- era.
The sensitivity of the video sensor can be adjusted, so that an alarm is generated only if specified values are exceeded. Various options for tamper protection allow you to set the reaction to tampering with cameras and video lines.
In order for the sensor to function, the following conditions must be met:
❚The motion detector must be enabled.
❚At least one sensor field must be activated.
❚The individual parameters must be set for the operating environment and the desired responses configured.
❚The sensitivity must be set to a value greater than zero.
Bosch Security Systems | Configuration using a Web browser |