EN 60 | Installation and Operating Manual VideoJet 8008 / VideoJet 8004 |
|
|
COM settings
You can configure the parameters of the RS232/485 serial interface to meet your requirements. On audio versions, you can also configure the parameters of the second RS232 serial interface.
COM1
Note
If the unit is working in multicast mode (see page 57 onward), the first remote location to establish a video connection to the unit is also assigned the transparent data connection. However, after about 15 seconds of inactivity the data connection is automatically terminated and another remote location can exchange transparent data with the unit.
Serial port function:
Select a controllable unit from the list. If you wish to use the serial port to transmit transparent data, select Transparent. Select Terminal if you wish to operate the unit from a terminal.
Note
After selecting a unit, the remaining parameters in the window are set automatically and should not be changed.
Configuration using a Web browser | Bosch Security Systems |