34 en Configuration Using a Web Browser | VideoJet X10 |
|
|
5.6 Password
A VideoJet X10 is generally protected by a password to prevent unauthorized access to the unit. You can use different authorization levels (User name) to limit access.
NOTICE!
Proper password protection is only guaranteed when all higher authorization levels are also
i protected with a password. If a live password is assigned, for example, a service and a user password must also be set. When assigning passwords, you should therefore always start from the highest authorization level, service, and use different passwords.
5.6.1User name
The VideoJet X10 operates with three user names: service, user and live, which correspond to different authorization levels.
The service user name is the highest authorization level. After entering the correct password, this user name allows you to use all the functions of the VideoJet X10 and change all configuration settings.
The user user name is the middle authorization level. You use it to operate the unit and also to control cameras, for example, but you cannot change the configuration.
The live user name is the lowest authorization level. It can only be used to view the live video image and switch between the different live image displays.
5.6.2Password
You can define and change a separate password for each user name if you are logged in as service or if the unit is not password protected.
Enter the password for the selected user name here.
5.6.3Confirm password
Enter the new password a second time to eliminate typing mistakes.
NOTICE!
i | The new password is only saved when you click the Set button. You should therefore click the |
| |
| Set button immediately after entering and confirming a password, even if you also wish to |
| subsequently assign a password to another user name. |
|
|
V3.0 2007.09 | Installation and Operating Manual | Bosch Security Systems |