Bosch Appliances X10 5.32.1Company logo, 5.32.2Device logo, 5.32.3Transmit audio, 5.32.4Bilinx control, 5.32.5Show alarm inputs, 5.32.6Show relay outputs, 5.32.8Show VCA metadata

VideoJet X10 Configuration Using a Web Browser en 87

1.Check the box for the items that are to be displayed on the LIVEPAGE. The selected items are indicated by a check mark.

2.Go to the LIVEPAGE to check whether and how the required items are displayed.

5.32.1Company logo

1.Enter the path to a suitable graphic if you want to replace the manufacturer's logo. The image file can be stored on a local computer, in the local network or at an Internet address.

2.If necessary, click Browse to search for an appropriate graphic in the local network.

5.32.2Device logo

1.Enter the path to a suitable graphic if you want to replace the product name. The image file can be stored on a local computer, in the local network or at an Internet address.

2.If necessary, click Browse to search for an appropriate graphic in the local network.

NOTICE!

i If you want to use the original graphics again, simply delete the entries in the Company logo and Device logo fields.

5.32.3Transmit audio

The audio signals are sent in a separate data stream parallel to the video data, and so increase the network load. The audio data are encoded according to G.711 and require an additional bandwidth of approx. 80 kbps for each connection.

5.32.4Bilinx control

Next to the field for view control at the top left of the LIVEPAGE, an additional field is displayed for the special Bosch Security Systems Bilinx control.

5.32.5Show alarm inputs

The alarm inputs are shown next to the video image as icons, along with their assigned names. If an alarm is active, the corresponding icon changes color.

5.32.6Show relay outputs

The relay outputs are shown next to the video image as icons, along with their assigned names. If the relay is switched, the icon changes color.

5.32.7Show VCA trajectories

The trajectories (motion lines of objects) from the video content analysis are displayed in the live video image if a corresponding analysis type is activated (see Section 5.23 VCA, page 65).

5.32.8Show VCA metadata

When the analysis function is activated, the additional information from the video content analysis (VCA) will be displayed in the live video image (see Section 5.23 VCA, page 65). With the MOTION+ analysis type, for example, the sensor fields in which motion is recorded will be marked with rectangles.

Bosch Security Systems Installation and Operating Manual V3.0 2007.09