70 en Configuration Using a Web Browser

VideoJet X10

 

 

5.24Alarm E-Mail

As an alternative to automatic connecting, alarm states can also be documented by e-mail. In this way it is possible to notify a recipient who does not have a video receiver. In this case the VideoJet X10 automatically sends an e-mail to a previously defined e-mail address.

5.24.1Send alarm e-mail

Select On if you want the unit to automatically send an alarm e-mail in the event of an alarm.

5.24.2Mail server IP address

Enter the IP address of a mail server that operates on the SMTP standard (Simple Mail Transfer Protocol). Outgoing e-mails are sent to the mail server via the address you entered. Otherwise leave the box blank (0.0.0.0).

5.24.3SMTP user name

Enter a registered user name for the chosen mailserver here.

5.24.4SMTP password

Enter the required password for the registered user name here.

5.24.5Layout

You can select the data format of the alarm message.

–Standard (with JPEG)

E-mail with attached JPEG image file.

–SMS

E-mail in SMS format to an e-mail-to-SMS gateway (for example to send an alarm by cellphone) without an image attachment.

CAUTION!

!When a cellphone is used as the receiver, make sure to activate the e-mail or SMS function, depending on the format, so that these messages can be received.

You can obtain information on operating your cellphone from your cellphone provider.

V3.0 2007.09

Installation and Operating Manual

Bosch Security Systems