74 en Configuration Using a Web Browser | VideoJet X10 |
|
|
5.26.3Relay follows
If required, select a specific event that will trigger the relay. The following events are possible triggers:
–Off
Relay is not triggered by events
–Connection
Trigger whenever a connection is made
–Video alarm
Trigger by interruption of the video signal
–Motion alarm
Trigger by motion alarm, as configured on the VCA page (see Section 5.23 VCA, page 65)
–Local input
Trigger by the corresponding external alarm input
–Remote input
Trigger by remote station's corresponding switching contact (only if a connection exists)
NOTICE!
i The numbers in the lists of selectable events relate to the corresponding connections on the unit, Video alarm 1, for example to the Video In connection.
5.26.4Relay name
You can assign a name for the relay here. The name is shown on the button next to Trigger relay. The Livepage can also be configured to display the name under the relay icon.
5.26.5Trigger relay
Click the button to trigger the relay manually (for testing or to operate a door opener, for example).
V3.0 2007.09 | Installation and Operating Manual | Bosch Security Systems |