VideoJet X10 | Configuration Using a Web Browser en 49 |
|
|
5.17.2iSCSI LUN Map
The LUN map displays the logical drives configured for the iSCSI system. The current user is displayed for each drive.
1.
2.If the logical drive is password protected, you must first enter the password in the Target password field and click the Set button.
In cases where the information cannot be read due to the network topology, you must enter the data manually, so that the VideoJet X10 can access the drive. In this case you should ensure that the entries correspond exactly with the configuration of the iSCSI system.
1.Enter the required data into the corresponding fields.
2.Click the Set button. The VideoJet X10 will now use this data to try and connect to the required drive.
As soon as a connection has been established, the selected drive is used for recordings.
5.17.3Target IP address
Enter the IP address of the required iSCSI target here.
5.17.4Target node
Enter the number of the iSCSI target node.
5.17.5Target LUN
Enter the LUN of the required drive.
5.17.6Target password
If the drive is password protected, enter the password.
| i | NOTICE! |
| You may not enter a new password. This is only possible by configuring the iSCSI system. | |
|
| |
|
|
|
5.17.7 |
| Initiator name |
|
| The initiator name is automatically displayed after a connection has been established. |
5.17.8 |
| Initiator extension |
|
| Enter the initiator extension. For the sake of clarity, you can enter a name or the existing |
|
| extension with a comment, for example "– Camera 2". |
Bosch Security Systems | Installation and Operating Manual | V3.0 2007.09 |