VideoJet X10 | Operation en 99 |
|
|
6.2.7System Log / Event Log
The System Log field contains information about the operating status of the VideoJet X10 and the connection. You can save these messages automatically in a file (see
Abschnitt 5.32 Livepage Configuration, Seite 86).
Events such as the triggering or end of alarms are shown in the Event Log field. You can save these messages automatically in a file (see Abschnitt 5.32 Livepage Configuration, Seite 86). You can delete the entries from the fields. To do this, click the icon in the top
6.2.8Audio Function
Depending on the configuration, the VideoJet X10 can send and receive audio signals. All users who are connected by browsers receive the audio signals sent by the VideoJet X10. Only the user who first connected to the VideoJet X10 can send audio signals to the unit.
1.On the LIVEPAGE, click anywhere next to the video image to remove the focus from the ActiveX.
2.Press and hold the F12 key to establish a voice connection with the VideoJet X10. The browser's status bar displays the message Send Audio ON.
3.Release the F12 key if you no longer wish to send audio signals to the VideoJet X10. The status bar in Internet Explorer displays the message Send Audio OFF.
NOTICE!
i When the connection maintaining voice contact with the VideoJet X10 is broken, the next user to connect to the VideoJet X10 can transmit the audio data to the VideoJet X10.
Bosch Security Systems | Installation and Operating Manual | V3.0 2007.09 |