VideoJet X20Operation en 101
6.6.2 | Controlling a Playback |
You will see a time bar below the video image for quick orientation. If a particular sequence has been clicked and selected for playback, the selected sequence appears in the list in blue. The associated time interval is displayed in the bar in gray. A green arrow above the bar indicates the position of the image currently being played back within the sequence.
The time bar offers various options for navigation in and between sequences.
1.You can change the time interval displayed by moving the gray area to the left or right while holding down the mouse button.
2.You can change the time interval displayed by clicking the zoom keys (magnifying glass icons). The display can span a range from two months to a few seconds.
3.You can select a different sequence for playback by clicking the corresponding gray marking.
4.If required, drag the green arrow to the point in time at which the playback should begin. Alternatively you can click directly in the gray time interval or in the timescale to jump to the position selected in this manner. The date and time display below the bar provides orientation to the second.
6.6.3ButtonsYou can control playback by means of the buttons below the video image. The buttons have the following functions:
Start or pause playback
Jump to the start of the active video sequence or to the previous sequence in the list
Jump to the start of the next video sequence in the list
Bosch Security Systems | Installation and Operating Manual | V3.5 2007.12 |