74 en Configuration Using a Web Browser | VideoJet X20 |
|
|
5.27COM1
You can configure the serial interface parameters (orange terminal block) to meet your requirements.
NOTICE!
If the VideoJet X20 is working in multicast mode (see Section 5.29 Multicasting, page 80), the
i first remote location to establish a video connection to the unit is also assigned the transparent data connection. However, after about 15 seconds of inactivity the data connection is automatically terminated and another remote location can exchange transparent data with the unit.
5.27.1Serial port function
Select a controllable unit from the list. If you wish to use the serial port to transmit transparent data, select Transparent. Select Terminal if you wish to operate the unit from a terminal.
NOTICE!
i After selecting a unit, the remaining parameters in the window are set automatically and should not be changed.
V3.5 2007.12 | Installation and Operating Manual | Bosch Security Systems |