VideoJet X20

Configuration Using a Web Browser en 31

 

 

5.3Identification

5.3.1Unit name

You can give the VideoJet X20 a name to make it easier to identify. The name makes the task of administering multiple units in larger video monitoring systems easier, for example using the VIDOS or Bosch Video Management System programs.

The unit name is used for the remote identification of a unit, in the event of an alarm for example. For this reason, enter a name that makes it as easy as possible to quickly identify the location.

CAUTION!

!Do not use any special characters, for example &, in the name.

Special characters are not supported by the system's internal recording management and may therefore result in the Player or Archive Player being unable to play back the recording.

5.3.2

Unit ID

 

Each VideoJet X20 should be assigned a unique identifier that you can enter here as an

 

additional means of identification.

5.4

Camera Names

 

The camera name makes it easier to identify the remote camera location, in the event of an

 

alarm for example. It will be displayed in the video screen if configured to do so (see

 

Section 5.5.1 Camera name stamping, page 32). The camera name makes the task of

 

administering cameras in larger video monitoring systems easier, for example using the VIDOS

 

or Bosch Video Management System programs.

5.4.1

Camera 1 / Camera 2

 

Enter a unique, unambiguous name for the camera in this field.

CAUTION!

!Do not use any special characters, for example &, in the name.

Special characters are not supported by the system's internal recording management and may therefore result in the Player or Archive Player being unable to play back the recording.

Bosch Security Systems

Installation and Operating Manual

V3.5 2007.12