114 en AppendixVideoJet X20
8.4 | LEDs |
|
| The VideoJet X20 network video server has a number of LEDs on its front and rear panels that | |
| show the operating status and can give indications of possible malfunctions: | |
8.4.1 | Power On LED |
|
| Does not light up: | VideoJet X20 is switched off. |
| Lights up green: | VideoJet X20 is switched on. |
8.4.2 | SFP LED |
|
| Does not light up: | No connection. |
| Lights up yellow: | Connection established. |
| Flashes yellow: | Data being transmitted. |
8.4.3 | ETH 1 LED |
|
| Does not light up: | No network connection. |
| Lights up yellow: | Network connection established. |
| Flashes yellow: | Data being transmitted over the network. |
8.4.4 | ETH 2 LED |
|
| Does not light up: | No network connection. |
| Lights up yellow: | Network connection established. |
| Flashes yellow: | Data being transmitted over the network. |
8.4.5 | Connect LED |
|
| Lights up red: | Startup in progress. |
| Lights up green: | Startup complete, VideoJet X20 is operational. |
| Flashes green: | Video connection established. |
| Flashes red: | VideoJet X20 is faulty, for example following failed firmware |
|
| upload. |
8.4.6 | HDD LED |
|
| Does not light up: | No hard drive fitted. |
| Lights up orange: | Hard drive fitted. |
| Flashes orange: | Hard drive activity. |
V3.5 2007.12 | Installation and Operating Manual | Bosch Security Systems |