106 en OperationVideoJet X20

6.9.4Connecting with a Terminal Program

Various requirements must be met in order to operate with a terminal program (see

Section 8.8 Communication with Terminal Program, page 117).

1.Start the terminal program and enter the command 1 in the main menu to switch to the IP menu.

2.Enter the command 4 in the IP menu to change the remote IP address, then enter the IP address of the unit you wish to connect to.

3.Enter the command 0 to return to the main menu and then enter the command 4 to switch to the Rcp+ menu.

4.In the Rcp+ menu, enter the command 5 to activate the automatic connection.

6.9.5

Closing the Connection with a Terminal Program

 

1.

Start the terminal program and enter the command 4 in the main menu to switch to the

 

 

Rcp+ menu.

 

2.

In the Rcp+ menu, enter the command 5 to deactivate the automatic connection.

V3.5 2007.12

Installation and Operating Manual

Bosch Security Systems