VideoJet X20Configuration Using a Web Browser en 47

5.16

Storage Medium

You can record the images from the cameras connected to the VideoJet X20 on various local storage media or on an appropriately configured iSCSI system.

The internal RAM memory of the VideoJet X20 is suitable for short-term recordings and pre- alarm recordings in ring mode operation.

CF cards (see Section 4.3.6 CF Slot, page 21) are the ideal solution for shorter storage times and temporary recordings, for example alarm recordings or local buffering in the event of network interruptions.

If the VideoJet X20 has a hard drive, this is suitable for longer, local recordings in mobile use. For long-term, authoritative images in stationary operation, it is essential that you use an appropriately sized iSCSI system.

It is also possible to let the Video Recording Manager (VRM) control all recording when accessing an iSCSI system. The VRM is an external program for configuring recording tasks for video servers. For further information please contact your local customer service at Bosch Security Systems.

5.16.1Type

Select the desired storage medium to subsequently configure the recording parameters.

If you select VRM, the Video Recording Manager will manage all recording, and you will not be able to make any further configurations here.

CAUTION!

! If you switch the storage medium from iSCSI system to another option, the settings on the iSCSI page will be lost and can only be restored by reconfiguring them.

5.16.2

Storage Information

The status of the currently selected storage medium and the data throughput are displayed here for information. You cannot change any of these settings.

1.Click Log to view a status report with logged actions. A new window will open.

2.In this window, click Clear to delete all entries. The entries will be deleted immediately. This action cannot be reversed.

3.Click the Close button to close the window.

Bosch Security Systems

Installation and Operating Manual

V3.5 2007.12