Bosch Appliances X20 Display Stamping, Time stamping, Alarm mode stamping, Camera name stamping

32 en Configuration Using a Web BrowserVideoJet X20

5.5 Display Stamping

Various overlays or "stamps" in the video image provide important supplementary information. These overlays can be enabled individually and are arranged on the image in a clear manner.

	i	NOTICE!
		The settings on this page apply to both camera inputs.
5.5.1		Camera name stamping

This field sets the position of the camera name overlay. It can be displayed at the Top, at the Bottom or at a position of your choice that you can then specify using the Custom option. Or it can be set to Off for no overlay information.

1.Select the desired option from the list.

2.If you select the Custom option, additional fields are displayed where you can specify the exact position (Position (XY)).

3.In the Position (XY) fields, enter the values for the desired position.

5.5.2	Time stamping
	This field sets the position of the time overlay. It can be displayed at the Top, at the Bottom or
	at a position of your choice that you can then specify using the Custom option. Or it can be
	set to Off for no overlay information.
	1.	Select the desired option from the list.
	2.	If you select the Custom option, additional fields are displayed where you can specify the
		exact position (Position (XY)).
	3.	In the Position (XY) fields, enter the values for the desired position.

5.5.3	Alarm mode stamping
	Select On to display a text message overlay in the image in the event of an alarm. It can be
	displayed at a position of your choice that you can then specify using the Custom option. Or it
	can be set to Off for no overlay information.
	1.	Select the desired option from the list.
	2.	If you select the Custom option, additional fields are displayed where you can specify the
		exact position (Position (XY)).
	3.	In the Position (XY) fields, enter the values for the desired position.

V3.5 2007.12 Installation and Operating Manual Bosch Security Systems