44 en Configuration Using a Web Browser | VideoJet X20 |
|
|
5.14Audio
You can set the gain of the audio signals to suit your specific requirements. The current video image is shown in the small window next to the slide controls to help you check the selected audio source and improve assignments. Your changes are effective immediately.
If you connect via Web browser you must activate the audio transmission on the Livepage Configuration page (see Section 5.32 Livepage Configuration, page 85). For other connections, the transmission depends on the audio settings of the respective system.
NOTICE!
i The numbering of the audio inputs follows the labeling on the unit and the assignment to the respective video inputs. The assignment cannot be changed for Web browser connections.
5.14.1Line In
You can set the audio signal gain for the line inputs. Make sure that the display does not go beyond the green zone during modulation.
5.14.2Line Out
You can set the line output gain. Make sure that the display does not go beyond the green zone during modulation.
5.14.3Selection
Click one of the option boxes and then click Set to display the level of the respective audio input for orientation and to set the gain.
V3.5 2007.12 | Installation and Operating Manual | Bosch Security Systems |