VideoJet X20Operation en 95

6.2

The LIVEPAGE

 

Once the connection is established, the Web browser displays the LIVEPAGE. It displays the

 

live video image on the right of the browser window. Depending on the configuration, various

 

text overlays may be visible on the live video image (see Section 5.5 Display Stamping,

 

page 32).

 

Other information may be shown next to the live video image on the LIVEPAGE. The display

 

depends on the settings on the Livepage Configuration page (see Section 5.32 Livepage

 

Configuration, page 85).

6.2.1

Maximum Number of Connections

 

If you do not connect, the unit may have reached its maximum number of connections.

 

Depending on the unit and network configuration, each VideoJet X20 can have up to 25 Web

 

browser connections or up to 50 connections via VIDOS or Bosch Video Management System.

6.2.2

Protected VideoJet X20

 

If the VideoJet X20 is password protected against unauthorized access, the Web browser

 

displays a corresponding message and prompts you to enter the password when you attempt

 

to access protected areas.

 

 

i

NOTICE!

A VideoJet X20 offers the option to limit the extent of access using various authorization levels

(see Section 5.6 Password, page 34).

 

 

 

 

1.

Enter the user name and associated password in the corresponding text fields.

 

2.

Click OK. If the password is entered correctly, the Web browser displays the page that

 

 

was called up.

6.2.3

Protected Network

 

If a RADIUS server is employed in the network for managing access rights (802.1x

 

authentication), the VideoJet X20 must be configured accordingly, otherwise no

 

communication is possible (see Section 5.28.17 Authentication, page 79).

6.2.4

Image Selection

 

You can view the image from each camera separately on a full screen. Alternatively, you can

 

display the camera images from both video inputs side by side (Dual Video).

 

1.

Click one of the tabs above the video image to view one or both of the camera images.

 

2. Click one of the tabs MPEG-4 Stream 1, MPEG-4 Stream 2 or M-JPEGbelow the video

 

 

image to toggle between the different displays of the camera image. The selection applies

 

 

to both camera images.

Bosch Security Systems

Installation and Operating Manual

V3.5 2007.12