VideoJet X20

Configuration Using a Web Browser en 49

 

 

5.17.2iSCSI LUN Map

The LUN map displays the logical drives configured for the iSCSI system. The current user is displayed for each drive.

1.Double-click a free drive (LUN). The associated information is called up and automatically displayed in the fields below the map.

2.If the logical drive is password protected, you must first enter the password in the Target password field and click the Set button.

In cases where the information cannot be read due to the network topology, you must enter the data manually, so that the VideoJet X20 can access the drive. In this case you should ensure that the entries correspond exactly with the configuration of the iSCSI system.

1.Enter the required data into the corresponding fields.

2.Click the Set button. The VideoJet X20 will now use this data to try and connect to the required drive.

As soon as a connection has been established, the selected drive is used for recordings.

5.17.3Target IP address

Enter the IP address of the required iSCSI target here.

5.17.4Target node

Enter the number of the iSCSI target node.

5.17.5Target LUN

Enter the LUN of the required drive.

5.17.6Target password

If the drive is password protected, enter the password.

 

i

NOTICE!

 

You may not enter a new password. This is only possible by configuring the iSCSI system.

 

 

 

 

 

5.17.7

 

Initiator name

 

 

The initiator name is automatically displayed after a connection has been established.

5.17.8

 

Initiator extension

 

 

Enter the initiator extension. For the sake of clarity, you can enter a name or the existing

 

 

extension with a comment, for example "– Camera 2".

Bosch Security Systems

Installation and Operating Manual

V3.5 2007.12