38 en Configuration Using a Web BrowserVideoJet X20

5.11

Encoder Profile

For encoding the video signal you can select two profiles for each encoder (video input) and change the presets for the profiles.

You can adapt the MPEG-4 data transmission to the operating environment (for example network structure, bandwidth, data load). To this end, the VideoJet X20 simultaneously generates two data streams (Dual Streaming) for each video input. You can select the compression settings of these data streams individually, for example one setting for transmissions to the Internet and one for LAN connections.

NOTICE!

i You must set the parameters for each camera input and for each stream individually. The names Video 1 and Video 2 correspond to the labeling of the video inputs on the unit.

Pre-programmed profiles are available, each giving priority to different perspectives.

–Profile 1: Low bandwidth (CIF)

High quality for low bandwidth connections, resolution 352 × 288/240 pixels

–Profile 2: Low delay (2/3 D1)

High quality with low delay, resolution 464 × 576/480 pixels

–Profile 3: High resolution (4CIF/D1)

High resolution for high bandwidth connections, resolution 704 × 576/480 pixels

–Profile 4: DSL

For DSL connections with 500 kbps, resolution 352 × 288/240 pixels

–Profile 5: ISDN (2B)

For ISDN connections via two B-channels, resolution 352 × 288/240 pixels

–Profile 6: ISDN (1B)

For ISDN connections via one B-channel, resolution 352 × 288/240 pixels

–Profile 7: Modem

For analog modem connections with 20 kbps, resolution 352 × 288/240 pixels

–Profile 8: GSM

For GSM connections at 9,600 baud, resolution 176 × 144/120 pixels

V3.5 2007.12

Installation and Operating Manual

Bosch Security Systems