Unpacking and Checking
Contents
! | WARNING | To avoid injury from unexpected starting or | |
electrical shock during unpacking and setting up, | |||
|
|
do not plug the power cord into a source of power. This cord must remain unplugged whenever you are working on the table saw.
Model 4100 Table Saw is shipped complete in one carton.
Separate all parts from packing materials and check each one with the illustration and the list of Loose Parts to make certain all items are accounted for before discarding any packing material (Fig. 3).
! | WARNING | If any parts are missing, do not attempt to | |
assemble the table saw, plug in the power cord or | |||
|
|
turn the switch on until the missing parts are obtained and are installed correctly.
Table of Loose Parts
ITEM | DESCRIPTION | QTY. |
1 | Table Saw Assembly | 1 |
2 | Rip Fence | 1 |
3 | Table Insert | 1 |
4 | Barrier Guard Assembly | 1 |
5 | 1 | |
6 | Miter Gauge | 1 |
7 | Push Stick | 1 |
NOTE: Remove styrofoam block 8 (for shipping purpose only) located between the table and motor (Fig. 4). You may cause damage to the blade elevation system if trying to raise blade if styrofoam is not removed.
FIG. 3
47
5
2 6
3
1
FIG. 4
8
24.
