Breville BIA500XL manual Disassembling the Freeze & Mix, OPERATING YOUR BREVILLE product

OPERATING YOUR BREVILLE product

NOTE

Pouring the mixture into the freezer bowl before starting the mixer may cause the mixture to freeze prematurely.

4.Mix the ice cream/frozen dessert until it has reached the desired consistency.

NOTE

If adding mix-ins (chocolate pieces, nuts, etc) to ice cream/frozen desserts, it is suggested that these be added to the mixture at least 15 minutes after the churning processes has begun.

NOTE

You can monitor the time that the ice cream has been churned by watching the Count-Up Timer. You can also set the Count-Down Timer on the mixer to the desired mixing time specified by the recipe. If longer mixing times are required, you can reset the time on the mixer if needed.

Disassembling the

Freeze & Mix™

1.One the churning process is complete and the ice cream/frozen dessert has reached the desired consistency, turn the Speed Control Dial to the OFF/STAND BY position and remove the power cord from the power outlet.

2.Remove splash guard if assembled.

3.Raise the mixer motor head by depressing the TILT-RELEASE button and lift the mixer motor head up until it tilts back and locks into the open position.

NOTE

When lowering or lifting the mixer motor head, always support the motor head with your other hand to prevent from free-falling.

4.Remove the Scraper Paddle by holding the mixer motor head and pressing the Scraper Paddle upwards on the spindle. Turn the Scraper Paddle anti-clockwise to release it from the pin on the spindle.

5.Use a plastic spatula to remove the excess ice cream/frozen dessert from the Scrapper Paddle.

6.Remove the freezer bowl from the indented bowl locking recess of the mixer base and turn anti-clockwise until the bowl releases.

Press and hold the arrows to scroll through the timer setting more quickly.

11

BIA500XL_IB_C12_FA.indd 11 17/04/12 11:16 AM