OPERATING YOUR BREVILLE product
Lift the mixer motor head up until it tilts back and locks into the open position.
4.Place the freezer bowl into the bowl locking recess of the mixer base and turn the bowl clockwise until the bowl locks securely into place.
NOTE
To remove or insert the freezer bowl, the mixer motor head must be raised and locked into the open position.
Attaching the Scrapper Paddle to the mixer motor head
NOTE
The freezer bowl must assembled and used immediately after removing it from the freezer to prevent it
from thawing.
1.Ensure the mixer motor head is in the raised/open position. Align the groove in the top of the Scraper Paddle with the locking pin on the spindle extending down from the mixer motor head.
2.Push the Scraper Paddle upwards and turn clockwise until it locks securely onto the locking pin on the spindle.
3.Lower the mixer motor head by depressing the
ATTACHING THE SPLASH GUARD TO THE FREEZER BOWL
1.Ensure the freezer bowl is securely attached to the mixer (see page 9). Place both pieces of the of the splash guard onto the freezer bowl so that the groove lip of the splash guard sits inside the groove of the freezer bowl.
Using the Freeze & Mix™
1.Ensure the Speed Control Dial is in the OFF position and insert the power plug into a grounded wall outlet. The illuminated LED speed indicator band will flash and the Count Up/Down timer will display “0:00.” The Freeze & Mix™ is now ready to be used.
2.Follow directions in the recipe for the ice cream or frozen dessert being prepared.
3.Turn the mixer on the slowest speed setting, marked FOLDING/KNEADING on the LED speed indicator band before adding any ingredients to the bowl. Once the Scraper Paddle has started
to rotate, add the mixture through the pouring spout of the splash guard and into the freezer bowl.
10
BIA500XL_IB_C12_FA.indd 10 | 17/04/12 11:16 AM |
