Breville BPR200 manual PAC geRE headerANDCLEANING

Models: BPR200

1 68
Download 68 pages 31.8 Kb
Page 62
Image 62

PAC geRE headerANDCLEANING.....

5.Disassemble lid.

a)First, gently pull the silicone rubber gasket out from under the gasket holder. Check periodically that it is clean, flexible and not cracked or torn. If damaged do not use the appliance.

WARNING

Do not use abrasive cleaners, steel wool or scouring pads.

Do not immerse metal base or power cord in water or any other liquid as they may cause electrocution.

Ensure removable cooking bowl is correctly positioned in the base before you commence cooking.

NOTE

After cooking rice or large meals, some cooking liquid may pool under lid at the top of appliance around the cooking bowl. This is normal. Use a paper towel or kitchen cloth to clean after every use. Use a small brush or cotton swab if necessary.

Call The Breville Customer Service Centre. Phone: 1300 139 798 to order a replacement.

NOTE

Replace silicone rubber gasket every 1–2 years (see your nearest Breville Service Centre).

b)To remove gasket holder, turn the holder so that the plastic tabs are not touching the lugs on the lid.

Remove the gasket holder by pulling straight up and out of the lid.

NOTE

There are 6 triangular metal cut out grips around the inside of the lid that keep the holder in place.

Wash gasket and holder in warm, soapy water. Rinse with clean water, dry thoroughly and place back in their original position.

NOTE

The silicone rubber gasket and holder can be washed in the top rack of a dishwasher to eliminate odour from spices.

61

Page 62
Image 62
Breville BPR200 manual PAC geRE headerANDCLEANING