OPERATING YOUR Juice Fountain™ Plus

NOTE:

The pulp container can be emptied during juicing by turning the Juice Fountain ’Off‘ and then carefully removing the pulp container. (Replace empty pulp container before continuing to juice). Do not allow the pulp container to overfill as this may prevent correct operation or damage the unit.

fig. 2

NOTE:

To minimize washing up place a plastic freezer bag into the pulp container to collect the pulp.

NOTE:

Self-Reset Overheating Protection The Juice Fountain is fitted with a self-resetting safety device which safeguards against overheating on the motor with excessive loads.

If overheating occurs, the juicer will automatically activate the overheating protection device and the motor will switch itself off. If this occurs, the Overload Protection LED will flash red. When the overheating protection is activated, allow the unit to cool for at least 15 minutes prior to continuing juicing. LED will continue to flash until the motor has reached below the temperature threshold.

The Juice Fountain will be more prone to overheating immediately after the overheating protection device has been activated, light loads are recommended.

!NEVER USE FINGERS TO PUSH FOOD DOWN THE FEED CHUTE OR TO CLEAR THE FEED CHUTE. ALWAYS USE THE FOOD PUSHER PROVIDED.

17

JE98XL_IB_Issue1,09.indd 17

16/12/09 11:26 AM

Page 17
Image 17
Breville JE98XL manual Operating Your Juice Fountain Plus