SPECIFICATIONS
SPECIFICATIONS
Model 074002 air compressors are powered by a single cylinder, overhead valve (OHV), air cooled, low emissions engine.
In the State of California, these air compressor engines are certified by the California Air Resources Board to meet emissions standards for 250 hours. Such certification does not grant the purchaser, owner or operator of this engine any additional warranties with respect to the performance or operational life of this engine.The engine is warranted as stated on pages 26 and 27.
Power Ratings
*The power ratings for an individual engine model are initially developed by starting with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure) (Revision
Product Specifications
Gross* Horsepower: . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5 HP
Pump Type: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Belt Drive
Pump Lubricant: . . . . . . . . . . . . . . . . . . . SAE 5W50 Synthetic
Pump Oil Capacity: . . . . . . . . . . . . . . . . . . . . . 15.2 oz. (450ml) Air Delivery:
At 40 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.0 CFM At 90 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.0 CFM
Engine Specifications |
|
Gross* Horsepower | . . . . . . . . . . . . . . 6.5 at 3600 rpm |
Bore | . . . . . . . . . . . . . 2.69 in. (68.3mm) |
Stroke | . . . . . . . . . . . . . . 2.2 in. (55.8mm) |
Displacement | . . . . . . . . . . . . . 12.57 in. (206 cc) |
Spark Plug |
|
Type: | Champion RC12YC or Equivalent |
Set Gap To: | . . . . . . . . . . . 0.030inch (0.76mm) |
Armature Air Gap: | . . . |
Valve clearance with valve springs installed and piston 1/4 in. (6 mm) past top dead center of compression stroke (inspect when engine is cold).
Intake | |
Exhaust | |
Fuel Capacity | . . . . . . . . . . . . . . . 1 U.S. gallon |
Engine Oil Capacity | . . . . . . . . 20 Ounces (.6 Liters) |
Engine Oil Type: |
|
Above 40° F | . . . . . . . . . . . . . . . . . . . . SAE 30 |
Below 40° F | . . . . . . SAE |
NOTE: For practical operation, the horsepower loading should not exceed 85% of rated horsepower. Engine power will decrease
13