Briggs & Stratton 271172, 270962, CE8069, 276535 Assemble Starter Motor Drive - C-Ring Retainer

Figure 24

2.Remove retainer (A, Figure 24), return spring (B), flat washer (C), wave washer (D), pinion gear (E), and starter clutch (F).

7

Figure 25

Assemble Starter Motor Drive - C-Ring

Retainer

1.Place clutch on starter shaft

(A, Figure 25). Rotate clutch until it drops into place (B).

Figure 26

2.Install pinion gear (C, Figure 26) with beveled edge of teeth up. Install return spring (D) into recess of pinion gear.

Figure 27

3.Place wave washer (E, Figure 27) with concave side up and flat washer (F) on starter clutch spline.

112