Briggs & Stratton 271172, 270962, CE8069, 276535, 273521 manual Move throttle lever to fast position

Vertical Models 110000, 120000 with Primer Carburetors

1.Loosen casing clamp screw (A, Figure 24, Figure 25).

2.Move throttle lever to fast position.

3.Move casing in direction of arrow until slack is removed.

4.Tighten casing clamp screw.

Figure 24

Figure 25

Vertical Models Series 110000, 120000 with Choke-A-Matic® Carburetors

1.Loosen casing clamp screw (A, Figure 26).

2.Move throttle lever to fast position.

3.Move casing in direction of arrow until casing stops moving and choke lever (B) moves to full choke position.

1

Figure 26

4. Tighten casing clamp screw.

Horizontal and Vertical Models 200000, 210000, 280000, 310000, 330000

1.Loosen casing clamp screw (C, Figure 27).

2.Set throttle control to FAST position.

3.Move governor control rack (D) until holes are aligned (B) between control lever (A) and the control bracket.

4.Tighten casing clamp screw.

Figure 27

17