Briggs & Stratton 271172, 270962, CE8069, 276535, 273521 manual Adjust governor system per Section

6.Place seal protector in oil seal and slide sump over crankshaft until it seats.

NOTE: It may be necessary to rotate crankshaft and cam gear to get oil pump (if equipped) to engage oil pump drive slot in cam gear.

7.Install sump screws in order shown in Figure 16 and Figure 17. Torque to values listed in Section 12 - Engine Specifications.

NOTE: The screw at position four or position nine (Figure 16 or Figure 17) was factory coated with sealant. Coat screw with a non-hardening sealant, such as Permatex® 2 or equivalent, before installing.

8. Adjust governor system per Section 1.

5

Figure 16

Figure 17

92