Features and Controls

Read this Operator’s Manual and safety rules before operating your generator.

Compare the illustrations with your generator, to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.

A

 

 

 

S

 

 

 

 

B

 

 

 

 

C

 

 

 

 

D

 

 

 

 

E

 

 

 

 

F

 

 

 

R

 

 

 

 

G

 

 

 

P

 

 

 

 

H

 

 

 

 

J

Reproduction

N

 

use.

 

K

 

 

for

 

L

 

 

 

M

 

 

Not

J - Oil Fill Cap/Dipstick — Check and add engine oil here.

A - Start Switch — Turn key to start (

) positi n to start

K - Oil Drain Plug — Drain engine oil here.

 

the engine. Turn key to off (O) position to switch ff

 

engine.

 

 

L - Grounding Fastener — Consult your local agency having

B - Hour Meter — Displays and records how many hours

juris iction for grounding requirements in your area.

your generator has run (up to 9,999.9).

 

M - Spark Arrester Muffler — Exhaust muffler lowers engine

C - Rocker Switch Circuit Breaker — The 120/240 Volt AC,

noise and is equipped with a spark arrester screen.

 

30A locking receptacle is provided with a 2 pole rocker

N - Air Cleaner — Protects engine by filtering dust and

 

switch circuit breaker to protect the gen rator against

debris out of intake air.

 

electrical overload.

 

 

P - Recoil Starter — Used to start the engine manually.

D - Choke Control — Used when starting a cold engine.

R - Fuel Valve — Used to turn fuel supply on and off to

 

E - Battery Float Charger Jack — Use battery float charger

 

engine.

 

jack to keep the starting battery charged and ready for

S - Fuel Tank — Capacity of seven (7) U.S. gallons (26.5 l).

 

 

 

F - 120/240 Volt AC, 30 Amp Locking Receptacle — May be used to supply electrical power for the operation of 120 and/or 240 Volt AC, 30 Amp, single phase, 60 Hz electrical, lighting, appliance, tool and motor loads.

G - 120 Volt AC, 20 Amp, Duplex Receptacle — May be used to supply electrical power for the operation of 120 Volt AC, 20 Amp, single phase, 60 Hz electrical, lighting, appliance, tool and motor loads.

H - Circuit Breakers (AC) — The 120 Volt AC, 20A duplex receptacles are provided with "push to reset" circuit breakers to protect the generator against electrical overload.

Items Not Shown:

Engine Identification — Provides model, type and code of engine. Please have these readily available if calling for assistance.

Identification Label — Provides model and serial number of generator. Please have these readily available if calling for assistance.

10

BRIGGSandSTRATTON.COM