Setting the Beeper Volume

You can change the beeper volume. The default (factory) setting is LOW. When the beeper is on, the fax machine will beep when you press a key, make a mistake or after you send or receive a fax.

1

Press Menu/Set, 1, 3.

3.BEEPER

2

Press ▲ or ▼ to select LOW,

 

 

HIGH or OFF.

 

3

Press Menu/Set.

 

Press Stop/Exit.

 

Setting the Speaker Volume

You can adjust the speaker volume by pressing Hook, and then selecting a speaker volume level.

Press

▲

or

▲

to adjust the volume level.

The LCD shows the setting you are choosing. Each key press changes the volume to the next setting. The new setting will remain until you change it again.

Choosing the Handset Volume (For Volume Amplify)

Before you begin to use your fax machine, you must decide if you need to set the handset volume to VOL AMPLIFY: ON? for a user who is hearing-impaired. The AMPLIFY volume level complies with FCC standards.

VOLUME AMPLIFY: OFF

This default setting is appropriate if none of the users are hearing-impaired. During a conversation, users can press

▲

or

▲

on the control panel to adjust the volume to LOW or

HIGH. When the handset is replaced, the handset volume will remain until you change it again.

Initial Setup 4 - 4