3 Take the used ribbon out of the cartridge:
1Snap out the upper and lower right white spools.
2Slide the roll off the blue gear and lower left white spool. (Do not remove the blue gear and lower left white spool).
Blue | Used Ribbon |
Gear |
|
| Upper White Spool |
White |
|
Spool |
|
(Do not | Lower White |
remove.) | |
| Spool |
| Cartridge |
4 Slide the white elastic off the new refill rolls and set them down with the full roll in the lower position. (The ribbon’s shiny side is facing down.)
5 Remove the white spools from the ends of the used cardboard cores. Then insert them into the same positions in the new cores.
White Spools
6 Install the new ribbon in the cartridge:
1Slip the lower left cardboard core onto the white spool of the cartridge and then slip the upper blue core onto the blue gear of the cartridge.
2Insert the upper and lower right white spools into the holders.
Blue | Shiny side is face down. |
| |
Gear |
|
White
Spool
White Spools
Insert the teeth of the white spool into the cutouts of the cardboard core.
Troubleshooting and routine maintenance 12 - 10