Fax Redial

If you are sending a fax manually and the line is busy, press Redial/Pause, and then press Fax Start to try again. If you want to make a second call to the last number dialed, you can save time by pressing Redial/Pause and Fax Start.

Redial/Pause only works if you dialed from the control panel.

If you are sending a fax automatically and the line is busy, the fax machine will automatically redial one time after five minutes.

How to fax

Automatic transmission

This is the easiest way to send a fax. Documents must be between

5.8and 23.7 inches (150 and 600 mm) long and between 5.9 and 8.5 inches (148 and 210 mm) wide.

IMPORTANT: Do not pick up the handset or press Hook.

1

2

Insert the document face down, top edge first in the Automatic Document Feeder (ADF).

Adjust the paper guides to fit the width of your document.

Paper Guides

3 Enter the fax number using One-Touch, Speed-Dial, Search or the dial pad. (See One-Touch dialing on page 6-1, Speed-Dialingon page 6-1 and Search on page 6-1.)

4 Press Fax Start.

Do not use paper that is curled, wrinkled, folded, ripped, stapled, paper clipped, pasted, or taped.

Do not use cardboard, newspaper or fabric.

The ADF can hold up to 10 pages, feeding each one individually through the fax machine. Use standard 17 lb-24 lb (64 g/m2-90 g/m2) paper when using the ADF; if you are using heavier paper, feed each sheet individually to prevent paper jams.

6 - 2 Setup Send