4.VOLUME AMPLIFY

VOLUME AMPLIFY: ON–TEMPORARY

This setting is appropriate if some of the users are hearing-impaired. During a conversation, users can press

▲

or

▲

on the control panel to adjust the volume to LOW or

HIGH. When the handset is replaced, the handset volume returns to the default setting of LOW.

VOLUME AMPLIFY:ON–PERMANENT

Choose VOL AMPLIFY: ON?–PERMANENT?if all of the users are hearing-impaired. During a conversation, users can press

▲

or

▲

on the control panel to adjust the volume to LOW or

HIGH. When the handset is replaced, the handset volume returns to the default setting of amplify.

When you press

▲

or ▲

on the control panel to adjust

the volume, the LCD shows the setting you are choosing. Each key press changes the volume to the next setting.

It is important that you do not choose PERMANENT unless all users are hearing-impaired. Otherwise, the default setting of amplify may damage the hearing of some users.

Setting Volume Amplify

Please carefully read Choosing the Handset Volume (For Volume Amplify) on page 4-4 before you do the following steps:

1 Press Menu/Set, 1, 4.

2 If none of the users are hearing-impaired, press ▲ or ▼ to select

VOL AMPLIFY:OFF?, and then press Menu/Set and go to Step 4.

—OR—

If some or all of the users are hearing-impaired, press ▲ or ▼ to select VOL AMPLIFY:ON?, and then press Menu/Set.

3 If all the users are hearing-impaired, press ▲ or ▼ to select PERMANENT?, and then press Menu/Set.

—OR—

If only some of the users are hearing-impaired, press ▲ or ▼ to select TEMPORARY, and then press Menu/Set.

4 Press Stop/Exit.

4 - 5 Initial Setup