Control panel setup
Gateway
This field displays the current gateway or router address used by the machine. If you are not using DHCP or BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a gateway or router, leave this field blank. Check with your network administrator if you are unsure.
a
b Press a or b to choose Network. Press OK.
c |
|
(For Wired) Press a or b to choose Wired LAN. |
|
(For Wireless) Press a or b to choose WLAN. | 6 |
Press OK. |
d Press a or b to choose TCP/IP. Press OK.
e Press a or b to choose Gateway. Press OK.
f Enter the Gateway address using the dial pad. (To enter numbers and text, see Entering Text on page 229.)
Press OK.
g Press Stop/Exit.
Node Name
You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will be the name that is registered by the WINS server on your network. Brother recommends the name “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.)
a
b Press a or b to choose Network. Press OK.
c
(For Wired) Press a or b to choose Wired LAN. (For Wireless) Press a or b to choose WLAN. Press OK.
d Press a or b to choose TCP/IP. Press OK.
93