Press Menu.

Control panel setup

DNS Server

Primary DNS Server IP Address

This field specifies the IP address of the primary DNS (Domain Name System) server.

Secondary DNS Server IP Address

This field specifies the IP address of the secondary DNS server. It is used as a backup to the Primary DNS server address. If the Primary server is unavailable, the machine will contact the Secondary DNS server. If you have a primary DNS server, but no secondary DNS server, simply leave this field blank.

a

b Press a or b to choose Network.

 

Press OK.

6

(MFC-9120CN, MFC-9010CN and DCP-9010CN) Go to step d.

(MFC-9320CW) Go to step c.

c (MFC-9320CW only)

(For Wired) Press a or b to choose Wired LAN. (For Wireless) Press a or b to choose WLAN. Press OK.

d Press a or b to choose TCP/IP. Press OK.

e Press a or b to choose DNS Server. Press OK.

f Press a or b to choose Primary or Secondary. Press OK.

g Enter the DNS Server address using the dial pad. (To enter numbers and text, see Entering Text on page 229.)

Press OK.

h Press Stop/Exit.

APIPA

The setting of On will cause the print server to automatically allocate a Link-Local IP address in the range (169.254.1.0 - 169.254.254.255) when the print server cannot obtain an IP address through the Boot Method you have set. (See Boot Method on page 90.) Choosing Off means the IP address does not change, when the print server cannot obtain an IP address through the Boot Method you have set.

a Press Menu.

b Press a or b to choose Network. Press OK.

(MFC-9120CN, MFC-9010CN and DCP-9010CN) Go to step d. (MFC-9320CW) Go to step c.

96