Control panel setup
Set to Default
The Set to Default allows you to reset each wired or wireless settings to the factory default. If you want to reset both wired and wireless settings, see Restoring the network settings to factory default on page 117.
a
b Press a or b to choose Network. Press OK.
c (For Wired) Press a or b to choose Wired LAN. (For Wireless) Press a or b to choose WLAN. Press OK.
d Press a or b to choose Set to Default. |
|
Press OK. | 6 |
e Press 1 to choose Reset. f Press Stop/Exit.
Wired Enable
If you want to use the wired network connection, set Wired Enable to On.
a
b Press a or b to choose Network. Press OK.
c Press a or b to choose Wired LAN. Press OK.
d Press a or b to choose Wired Enable. Press OK.
e Press a or b to choose On or Off. Press OK.
f Press Stop/Exit.
101