Wireless configuration for Macintosh using the Brother installer application (MFC-9320CW only)

m The wizard will search for wireless networks available from your machine. Choose the Ad-hoc network you wish to associate the printer with, and then click Next.

5

Note

•If the list is blank, check if the machine is within range for wireless communication. Then, click Refresh.

•If your target Ad-hoc network does not appear on the list, you can manually add it by clicking the Add button. Check This is an Ad-hoc network and there is no access point., and then enter the Name (SSID) and the Channel number, and then click Next.

n If your network is not configured for Authentication and Encryption, the following screen will appear. To continue configuration, click OK and go to p.

85