Configuring your machine for a wireless network (For MFC-9320CW)

Configuration using the Brother installer application on the CD-ROM to configure your wireless network machine

You can also use the Brother installer application on the CD-ROM we have provided with the printer. You will

 

be guided by the on-screen instructions until you are able to use your Brother wireless network machine. You

 

must know your wireless network settings before you proceed with this installation. (See Using the Brother

 

installer application on the CD-ROM to configure your machine for a wireless network on page 38.)

3

Configuration temporarily using a network cable

If there is an Ethernet Hub or Router in the same network as the wireless access point (A) of your machine, you can temporarily connect the Hub or Router to the machine using an Ethernet cable (B), this is an easy way to configure your machine. You can then remotely configure the machine from a computer on the network.

A

B

30